DELTA®-FASSADE S – UV-Stable Barrier For Open-Joint Cladding

Air- & Water-Resistive Barriers

  • Durable drainage plane, channels bulk liquid from wind-driven rain and snow to the outside of the structure
  • High vapor permeability, allows moisture within the cavity to escape swiftly via diffusion
  • Watertight; protects the building enclosure from the possible damage of moisture infiltration
  • Lightweight and tear resistant, making installation fast, easy and reliable
  • Matte black; prevents blinding during installation and acts as a blank canvas, allowing the open cladding architecture to shine
  • Designed for permanent UV exposure in open joint cladding systems.
  • Consists of highly tear-resistant polyester substrate with a waterproof coating.
  • Ideal for use in metal and wood stud construction.
  • Easy to install.

DELTA®-VENT SA – Highly Permeable Water-Resistive Barrier

Air- & Water-Resistive Barrier

  • Vapor permeable; moisture within the building enclosure can escape through the membrane via diffusion
  • Fully adhered to the substrate, no fasteners are required, eliminating leaks and improving the performance of the building enclosure with increased airtightness, making it ideal for energy-efficient construction
  • Lightweight and tear resistant, the membrane withstands the rigors of job sites, as well as tough wind and weather
  • Two outer layers are made of a high-strength, spun-bonded polypropylene fabric
  • Outer layers are thermally bonded to a highly vapor-permeable, watertight, polymeric middle layer
  • Adhesive is applied to the bottom layer of polypropylene
  • Dramatically exceeds the most stringent requirements of the Air Barrier Association of America (ABAA) based on the results of ASTM E2357 – 11 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

DELTA®-DRY STUCCO & STONE

Rainscreen

  • Structured membrane provides two-sided exterior and interior drainage and ventilation
  • Pre-installed polypropylene fabric mortar screen prevents scratch coats from filling its dimple structure
  • Ventilated air space allows interior water vapor to escape between the sheathing board and the membrane while minimizing condensation that could cause potential damage within the building enclosure
  • Material is easily cut with a utility knife, and seams are simply butted together, making overlapping unnecessary

DELTA®-DRY

Rainscreen

  • Structured membrane provides two-sided exterior and interior drainage and ventilation
  • Ventilated air space allows interior water vapor to escape between the sheathing board and the membrane while minimizing condensation that could cause potential damage within the building enclosure
  • Complete capillary break behind the cladding provides ventilation, which captures and drains transient moisture migrating through the wall structure
  • Waterproof, resisting the passage of bulk water from wind-driven rain and snow, and managing water leakage through the cladding
  • Installed outboard of the water-resistive barrier over sheathing board
  • Material is easily cut, and seams are simply butted together, making overlapping unnecessary
  • Exterior cladding material can be installed as usual, right on top of the rainscreen